3 - 160mm Pure Titanium Alloy Rod Solid Titanium Round Rod

PRODUCT DESCRIPTION

Titanium Alloy Rod Pure Titanium Solid Titanium Round Rod Φ3-160mm Can Be Cut

Heat Treatment

Oxygen, nitrogen, carbon and hydrogen are the main impurities in titanium alloys. Oxygen and nitrogen have high solubility in α phase, which has obvious strengthening effect on titanium alloy, but will reduce its plasticity. Oxygen and nitrogen content in titanium are usually specified below 0.15-0.2% and 0.04-0.05%, respectively. The solubility of hydrogen in the alpha phase is very small. Excess hydrogen dissolved in titanium alloys can form hydrides, which can make the alloy brittle. Generally, the hydrogen content in titanium alloys is controlled below 0.015%. The dissolution of hydrogen in titanium is reversible.

Titanium alloys can be divided into heat-resistant alloys, high-strength alloys, corrosion-resistant alloys (Ti-Mo, Ti-Pd alloys, etc.), low-temperature alloys and special functional alloys (Ti-Fe hydrogen storage materials and Ti-Ni memory alloys) . The composition and properties of typical alloys are listed in the table.

Different phase compositions and structures can be obtained by adjusting the heat treatment process. It is generally believed that the fine equiaxed structure has better plasticity, thermal stability and fatigue strength; the acicular structure has higher endurance strength, creep strength and fracture toughness; the equiaxed acicular hybrid structure has better comprehensive properties.

Titanium alloy has high strength, low density, good mechanical properties, good toughness and corrosion resistance. In addition, titanium alloys have poor technical properties and are difficult to machine. Impurities such as hydrogen, oxygen, nitrogen and carbon are easily absorbed during thermal processing. The wear resistance is poor and the production process is complicated. The industrial production of titanium began in 1948. With the development of the aviation industry, the titanium industry is growing at an average rate of 8% per year. At present, the annual output of titanium alloy processing materials in the world has reached more than 40,000 tons, and there are nearly 30 kinds of titanium alloy grades. The most widely used titanium alloys are Ti-6Al-4V (TC4), Ti-5Al-2.5Sn (TA7) and industrial pure titanium (TA1, TA 2 and TA3).

DESCRIPTION:

Competitive Advantage:

Our company is located in Baoji who has another name called titanium city .We are the professional manufacturer who manufacture high competitive titanium products. We have more than eight years of experience in production of titanium procucts. we strictly control every process of production and strive to provide customers with high quality products,And our products sale to all over the world. And we have a lot of titanium product categories, from fasteners titanium screws to raw materials titanium tubes, rods, plates and other industrially used materials, we can produce all of them. We are a private enterprise, but our quality and production level are in China's titanium The forefront of the product industry.